How to Download and Install Hp Procurve Msm320 Firmware
If you have a Hp Procurve Msm320 wireless access point, you may want to update its firmware to the latest version for improved performance and security. Firmware is the software that runs on your device and controls its functions. Updating firmware can fix bugs, add new features, and enhance compatibility with other devices.
In this article, we will show you how to download and install Hp Procurve Msm320 firmware from the official Hp support website. You will need a computer with internet access, a USB flash drive, and your Hp Procurve Msm320 device.
Step 1: Download the firmware file
The first step is to download the firmware file from the Hp support website. You can use the following link to access the download page:
On the download page, you can either enter your product name or number in the search box, or select your product from the list of categories. For example, you can type \"Hp Procurve Msm320\" or \"J9374A\" in the search box, or select \"Networking\" and then \"Wireless Access Points\" from the categories.
Once you find your product, click on it to open its software and driver page. You will see a list of available downloads for your device. Look for the firmware section and click on \"Download\" next to the latest version. For example, you may see something like this:
The firmware file will be downloaded to your computer as a zip file. You will need to extract it before installing it on your device.
Step 2: Extract the firmware file
The next step is to extract the firmware file from the zip file. You can use any software that can unzip files, such as WinZip, WinRAR, or 7-Zip. Right-click on the zip file and choose \"Extract All\" or a similar option. You will be asked to choose a destination folder for the extracted files. You can choose any folder you like, but make sure you remember its location.
After extracting the files, you will see a folder with the same name as the zip file. Open it and look for a file with a .swi extension. This is the firmware file that you will need to install on your device. For example, you may see something like this:
Step 3: Copy the firmware file to a USB flash drive
The third step is to copy the firmware file to a USB flash drive. You will need a USB flash drive that has enough space to store the firmware file. Plug the USB flash drive into your computer and wait for it to be recognized. Then, copy the .swi file from the folder where you extracted it and paste it into the root directory of your USB flash drive. The root directory is the main folder of your USB flash drive that does not have any subfolders.
After copying the file, eject your USB flash drive safely from your computer and unplug it.
Step 4: Install the firmware on your device
The final step is to install the firmware on your device. You will need to connect your device to a power source and turn it on. Then, plug your USB flash drive into one of the USB ports on your device. Wait for a few seconds until you see a green LED flashing on your device. This means that your device has detected the firmware file on your USB flash drive and is ready to install it.
To start the installation process, press and hold the reset button on your device for about 10 seconds until you see all LEDs flashing green. This means that your device is installing the firmware from your USB flash drive. Do not unplug or power off your device during this process.
When the installation is complete, your device will reboot automatically and start running with the new firmware. You can unplug your USB flash drive from your device and use it normally.
In this article, we have shown you how to download and install Hp Procurve Msm320 firmware from the a474f39169